HomeWAEC News

WAEC Physics Answers 2024 Essay/Obj Questions Out

2024 WAEC Physics Question and Answer for Objective and Essay is Out.

The Waec physics question and answer 2024 can now be seen from here. The West African Examination Council (WAEC) Physics paper for GCE will be taken on Thursday, 7th December, 2023.

WAEC Physics questions and answers for essay objectives are now available. The Waec Physics 2 (Essay) paper will start by 9:30 am and will last for 1hr 30 mins while the Waec Physics 1 (Objective) exam will commence 11:00 am and will last for 1hr 15 mins.

Following recent reviews, it has been found out that the weaknesses of candidates in WAEC Physics questions included lack of understanding of the fundamentals of the course, inability to take precise measurements to the required accuracy, inability to plot graphs correctly, and disregard of instruction, which makes them lose marks.

Also See: WAEC Physics SSCE Questions and Answers Here

waec physics expo 2020

In this post, we will be posting samples of the waec physics questions for candidates that will participate in the examination from past questions.

WAEC Physics Answers 2024 Questions.

PAPER 2 [Essay]
Read Instructions.
Write your answers in the answer booklet provided.

1. A particle is projected horizontally at 15ms-1 from a height of 20m.
Calculate the horizontal distance covered by the particle just before hitting the ground.
[g = 10 ms-2]
ANS: Let R represent the horizontal distance covered at time, t.
h = ½ gt2
20 = ½ x 10 x t2
t = 2s
R  = ut
=  15 x 2
= 30m

2. (a) tate Faraday’s second law of electrolysis.
(b) An electric charge of 9.6 x 104 C liberates 1 mole of substance containing 6.0 x 1023 atoms.  Determine the value of the electronic charge.
ANS: (a) If the same quantity of electricity is passed through different voltameters/electrolytes connected in series the masses of the substances liberated/deposited during electrolysis are (directly) proportional to their chemical equivalents.
(b) Let e represent the electronic charge.
e  =   Faraday’s constant
Avogadro’s number
=          9.6 x 104
6. 0. x 1023
=  1.60 x 10-19C

3. State three methods of polarizing an unpolarized light.

4. (a) State Faraday’s second law of electrolysis.
(b) An electric charge of 9.6 x 104 C liberates 1 mole of a substance containing 6.0 x 1023 atoms. Determine the value of the electronic charge.
ANS: (a) The mass of an element deposited /liberated during electrolysis is (directly) proportional to the chemical equivalent of the element.
(b) Let e represent the electronic charge.
e  =  Faraday’s constant
Avogadro’s number
9.6 x104
   6. 0. x 1023
=  1.60 x 10-19C

5. Explain the following terms:
(a) tensile stress;
(b) Young’s modulus.

6. (a) Define diffusion.
(b) State two applications of electrical conduction through gases.
ANS: (a) Diffusion is the process by which substances mix with one another due to the random motion of their molecules.
(b) Applications of electrical conduction through gases include:
– In advertising industry/ Neon signs
– In lighting/ fluorescent tubes
– Identification of gases
– Cathode ray oscilloscope/ T.V. tubes.

7. (a) List two properties of cathode rays.
(b) Explain how the intensity and energy of cathode rays may be increased.
ANS: (a) Properties of cathode rays:
– They are negatively charged.
– travel in straight line in field free space.
– are deflected by electric/magnetic field.
– possess (kinetic) energy.
– possess momentum.
(b) The intensity of cathode rays may be increased by raising the temperature of the cathode /increasing the current through the heater.
They may be increased by raising the potential difference between the anode and the cathode/ the anode potential.

8. Give three observations in support of de Broglie’s assumption that moving particles behave like waves.

9. (a) Differentiate between plane polarization and interference as applied to waves.
(b) List two uses of polaroids.
ANS: (b) They are used in:
– production of 3-dimensional films
– determination of the concentration of sugar solution
– polaroid cameras
– sunglasses.

10. (a) State two factors that affect the mass of elements deposited during electrolysis.
(b) List two non-electrolytes.
ANS: (a) time, current /quantity of charge, nature/ e.c.e of element.
(b) water, kerosene, petrol, benzene, ethanol.

11.

waec physics questions 2020

12. (a) i. State two advantages of alcohol over mercury as a thermometric liquid.
ii. When the bulb of a thermometer is placed in a beaker of hot water, the level of mercury first falls and then rises gradually. Explain this observation.
(b) List two factors, other than temperature, that affect the rate of evaporation of a liquid.
(c) A block of lead of mass 100kg in a crucible and at a temperature of 40oC was placed in an electric furnace rated 10kW. If the melting point of lead is 320oC, calculate the:
(i) quantity of heat required to heat the lead to its melting point;
(ii) additional heat energy required to melt the lead;
(iii) time is taken to supply this additional energy.
(Specific heat capacity of lead = 120JKg-1 K-1
(Specific latent heat of fusion of lead = 2.5 x 104 JK-1)
(d) State two precautions necessary in an experiment to determine the specific latent heat of vaporization of water.

ANS: (a) i. Advantages of alcohol over mercury as a thermometric liquid
–  lower freezing point
–  cheaper
– easily expansively.
ii. the glass of the bulb of the thermometer first expands; hence the mercury level fails. The expansion of the mercury increases more than that of the glass and the liquid rises.
(b) Factors other than temperature affecting the rate of evaporation of a liquid
– wind
– humidity/ dryness of the air
–  nature of liquid/ viscosity /density
– the area of liquid exposed
–  pressure.

13. (a) State two factors that affect the angle of deviation of a ray of light through a triangular glass prism.
(b) Seven virtual images of an object are formed when two plane mirrors are inclined at an angle of 0 to each other. Calculate the value of 0.
(c) By means of a ripple tank, a student was able to generate a series of transverse waves by varying the frequency of the dipper, and all the waves so generated covered a distance of 0.80 m in 0.2 s.
(i) Determine the speed, v, of the waves
(ii) Copy and complete the table given above in your answer booklet.
(iii) Plot a graph with f on the vertical axis and h -1 on the horizontal axis.
(iv) What does the slope of the graph represent?

14. Fig. 5.1 below shows a ray of light entering and passing along an optical fiber.

waec physics solution

(a) Calculate the refractive index of the glass in the optical fiber.
(b) Explain why the ray of light is totally internally reflected at A.
(c) Both optical fiber and copper wire are used to transmit data. Optical fiber is cheaper and can carry more data per second than copper wire.
State one other advantage of using an optical fiber rather than copper wire to transmit data.

15. (a) State two differences between a sound wave and a radio wave
(b) Explain why a vibrating tuning fork sounds louder when its stem is pressed against a tabletop than when held in the air.
(c) State two conditions necessary for the:
i. production of stationary wave in a medium;
ii. formation of interference wave patterns;
iii. occurrence of total internal reflection of a wave.
(d) i. A ray of light is incident on one face of an equilateral glass prism. Draw a ray diagram to show the path of the ray through the prism.
ii. Calculate the refractive index of the glass if the angle of minimum deviation is 41o.

WAEC Physics Objective Questions 2024.

Paper 1 [Objective]
Answer ALL questions in this section.
Shade your answers on the answer booklet provided.

1. An electron moves with a speed of 2.00 x 107 ms-1 in an orbit in a uniform magnetic field of 1.20 x 10-3T. Calculate the radius of the orbit.
[Mass of an electron = 9.11 x 10-31kg; charge on an electron = 1.61 x 10-19C]

2. A tennis ball projected at an angle attains a range R = 78 m. If the velocity imparted to the ball by the racket is 30ms-1, calculate.
[g=10ms-2]

3. A metallic bar 50 cm long has a uniform cross-sectional area of 4.0 cm2.  If a tensile force of 35kN produces an extension of 0.25 mm, calculate the value of Young’s modulus.

4. A stone projected horizontally from the top of a tower with a speed of 4 ms-1 lands on the level ground at a horizontal distance of 25 m from the foot of the tower. Calculate the height of the tower.
[g = 10 ms-2]

5. A spiral spring with a metal extends by 10.5cm in the air. When the metal is fully in water, the spring extends by 6.8 cm. Calculate the relative density of the metal (Assume Hooke s law Is obeyed)

6. A ray of light is incident on an air-glass boundary at an angle t? If the angle between the partially reflected ray and the refracted ray is 90°, calculate θ given that the refractive index of glass is 1.50.

7. A ball is projected horizontally from a height with a velocity of 40 ms-1. Calculate the drop in height after traveling a horizontal distance of 30m.
[Neglect air resistance; g = 10 ms-1]

8.

NOTE: There is nothing like Waec physics expo online. Do not be deceived by fraudsters posing with fake Waec physics answers on the internet. The resources above on WAEC Physics Answers have been made available to assist candidates to understand the required standards expected in Physics final Examination.

Keep following, more questions and answers will be added soon.


Spread the love - Share this with your friends

Comments (43)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.